Tap water has increasingly become unsafe for drinking due to increased contamination. Although the local municipality may have treated the water, the possibility of contamination during supply is very high. That’s why households in Australia are advised to purify tap water before drinking.
The good news is that there many ways that you can keep tap water clean. Some of these ways may cost you some money, but others will cost you nothing apart from your time. In this guide, we have put together some 10 best ways of keeping tap water clean.
One of the easiest ways to keep tap water clean is boiling. It is one of the best homemade solutions for treating contaminated tap water. Boiling water kills all the deadly disease-causing microorganisms in the water. Studies have also shown that boiling water can also neutralise dangerous chemicals in the water. All you have to do is to put water in a pot or microwave-safe vessel and heat it to a rolling boil for at least 1 minute. Then allow it to cool before transferring it to a clean container.
2. Cleaning Kitchen Sink Drains
Most people don’t know that their kitchen sink drains could be contaminating their water. Clogs in the sink provide a perfect breeding ground for bacteria and other disease-causing microorganisms. Some of these bacteria and microorganism may find their way to the faucets, and that’s how they contaminate tap water. What you need is drain cleaning services to remove sink clogs. Check out Drain Cleaning Brisbane for professional drain cleaning services. They are Brisbane plumbing specialists and will help you keep your tap water clean by cleaning your sink drains.
3. Use Chlorine Bleach
Chlorine is one of the widely used chemicals for water purification. The chemical works by killing bacteria and other disease-causing microorganisms in the water. The chlorine bleach has a high concentration of acid. So, when added to the water, it makes raises water acidity making it impossible for the microorganisms to survive. You should use 8 drops for household bleach for 4 litres of water. This will be enough to kill all the deadly bacteria and microorganisms in the water.
4. Use UV Light water Purifier
One of the most advanced technology in water purification is the use of UV light. The UV light water purifiers use the ultraviolet light to kill bacterial, viruses, and protozoa in the water. All you need is a gadget that produces UV light clean tap water. Just turn the light on, drop it into the water in a container, and swish it around for a minute or as per manufacturer’s instructions. The remove it and the water will be clean and safe for drinking.
5. Use Iodine
Most of the water purification tablets are iodine. That’s something most people may not know. If you want to clean water at an affordable cost, you need to buying iodine. You can either buy iodine solution, tablets, or crystals for tap water cleaning. All you have to do is to add it into the water, shake well, and leave it for at least 5 minutes. Iodine kills bacteria, protozoans, and viruses in the water. However, it works great in warm water.
6. Use Water Filtration System
If you have some money to spend, then you need to consider buying a water filter. There are many water filtration systems including carbon filters, reverse osmosis, and water ionisers amongst others. However, carbon filters are the most recommended because they get rid of chemicals such as lead and other disease-causing microorganisms. Water filters also remove particles in the water. In addition to that, there are some high-quality water purifiers that add minerals to the purified water.
7. Fix Leaks In Your Plumbing
It is important that you check your plumbing system for leaks. In most cases, bacteria and other microorganisms contaminating tap water get access through cracked pipes. Therefore, you need to ensure that your plumbing system is inspected for leaks every often. However, it is important to ensure that you are dealing with a professional plumber when inspecting leaks. Look for someone who is using the latest leak detection and location technology.
8. Always Clean Gasoline And Solvent Spill
Spills in your garage could find their way to your tap water through cross-contamination. Maybe the clean water pipe pass through the garage could get cracked hence allowing gasoline and solvent spill into your water supply. This exposes you to serious health complications since both liquids may contain lead and other harmful heavy metals. Therefore, always make sure that you have thoroughly cleaned gasoline and solvent spills. You will reduce not only diseases but also environmental degradation.
9. Update Your Plumbing System
It is important that you update your plumbing system to maintain the quality of tap water. The water from the municipality could be clean but gets contaminated in your plumbing. There are old plumbing systems done using copper other metal pipes. With time, these metals start to rust hence contaminating the water with rust and harmful chemicals. Update such plumbing pipes with PVC and other modern options. You should also consider changing your faucets after using them for at least ten years.
10. Water Softening
One of the biggest problems in most households in Australia is hard water. If you are using water from your well, natural stream, and even the municipal supply, most of this water is hard. To keep your tap water clean, one of the things that you need to consider is installing a water softener at the entry point. It will significantly improve the quality of your tap water.
In conclusion, your tap water is not clean and safe for drinking. It is likely to be contaminated along with the supply or even in your home plumbing system. With these 10 tips, you will be able to improve the quality of your tap water as well as keep clean. However, some of these tips require the services of a plumbing specialist.